Which Trusted Trader & Gas Safe Registered
He@Heating Limited

Boiler Repair

Gas Safe engineers who diagnose and repair combi, system and conventional boilers in and around Great Dunmow. Safe fixes with clear advice and written confirmation of work.

Boiler repairs from a local Gas Safe team

Our Gas Safe-registered engineers lead every job, diagnosing faults on arrival and repairing boilers safely. Our small local team works on combi, system and conventional boilers, prioritising tidy workmanship, clear explanations and written job notes after every visit.

We’re heating engineers based in Great Dunmow, serving Chelmsford, Saffron Walden, Bishop’s Stortford and the surrounding area. Our boiler repair in Great Dunmow covers everything from a boiler that won’t fire to a leaking valve.

Boiler repairs from a local Gas Safe team

How a boiler repair works

01

Call & Triage

Tell us the symptoms and location. We prioritise local callouts from Great Dunmow outwards and advise whether the issue needs emergency attention.

02

On-site Diagnosis

A Gas Safe engineer inspects the boiler, reads fault codes, and explains the cause in plain terms before any work begins.

03

Quote & Approval

You get a clear quote for the repair, and we only go ahead with your approval. If a replacement makes more sense, we'll say so.

04

Repair, Test & Report

We carry common parts where possible, complete repairs to current safety standards, run pressure and combustion checks and leave written notes on the work done.

What you get with He@Heating

Gas Safe Registered Engineers

All work is carried out by Gas Safe-registered engineers, and you can ask to see their Gas Safe ID on arrival.

Local, Responsive Team

A small Great Dunmow team with priority and emergency support available for urgent faults.

Transparent Advice & Aftercare

You get clear, written quotes, honest advice on repairs versus replacement and guidance on servicing to protect warranties and reduce future breakdowns.

Local Gas Safe engineers who fix boilers properly

He@Heating Limited carries Gas Safe registration plus Which? Trusted Trader verification. Our small, vetted team is experienced with the combi, system and conventional boilers found in Great Dunmow and surrounding towns. We work to current safety standards, carry common genuine parts where possible and provide written confirmation of all work completed.

Common boiler faults, what causes them and what we do

No heating or hot water. Often a failed pump, a diverter valve or a motorised valve sticking. We test each part, replace the one that's failed and check the controls are calling for heat.

Loss of pressure. Usually a small leak, a worn pressure relief valve or a faulty expansion vessel. We find the cause rather than just topping it up. See why boiler pressure keeps dropping.

Leaks. From a valve, seal or the heat exchanger. Turn the boiler off and put a bowl underneath; our guide to a leaking boiler explains what to do next.

Kettling and banging. Limescale or sludge restricting the water flow through the heat exchanger. We'll advise whether a clean or a system flush will stop it coming back. Read kettling causes and next steps.

Ignition faults and shutdowns. A boiler that won't light or keeps turning off can point to an ignition electrode, gas valve, fan or sensor fault. See why a boiler keeps turning off.

Fault code lockouts. Note the code and tell us when you call. Our guide to boiler fault codes covers what you can safely check.

Frozen condensate pipe. In a hard frost the plastic pipe outside can freeze and lock the boiler out. Here's how to spot and thaw it safely.

Radiators not heating. Trapped air, sludge or a stuck valve. Try the quick checks before calling, and we'll take it from there.

Boiler makes we repair

We're a Baxi certified installer and an ATAG Selected Partner, and we work on Worcester Bosch, Ideal and Glow-worm boilers too. If your boiler is another make, tell us the make and model when you call and we'll confirm.

What affects the cost of a boiler repair

We don't guess prices over the phone, because the cost depends on what the engineer finds. The main things that shape it are:

  • The fault: some are fixed in minutes; intermittent faults take longer to trace

  • The parts needed: a sensor or valve motor costs less than a pump, fan or circuit board, and sometimes a part can be cleaned rather than replaced

  • Access: a boiler in a loft or a tight cupboard can take longer to work on

You get a clear quote after diagnosis, before any repair goes ahead.

"On inspection a new boiler was not required just a faulty component" - George Henderson, Google review

"quickly diagnosed the issue with my boiler, and explained the repair process clearly. The repair was done efficiently, and my boiler is now running as it should." - Luke, Google review

Frequently Asked Questions

We offer rapid local response and often book same-day visits for urgent faults. Response depends on current diary and parts availability, so get in touch to discuss priority or emergency support and we'll advise the best next step.

Repair cost varies by fault, parts required and access to the boiler. We won't guess prices over the phone: the engineer provides a clear quote after diagnosis so you can decide. We always explain if a repair or replacement is the more cost-effective option.

If the boiler is fairly young and the fault is a single part, a repair usually makes sense. If it's older, keeps breaking down or needs parts that are hard to find, replacement may cost less over time. We'll give you an honest view, and our guide to repair vs replacement goes into more detail.

Yes. All on-site engineers are Gas Safe registered and will show their ID on arrival. Work is completed to current safety standards and we provide written confirmation of checks and repairs.

The engineer carries out a focused inspection, reads any fault codes, isolates the appliance if necessary, and explains the fault and repair options. We only proceed with your approval, then test the boiler and leave written notes about parts fitted and any safety checks performed.

If you smell gas, do not operate electrical switches or appliances. Open doors and windows, leave the property immediately and call the National Gas Emergency Service on 0800 111 999. Contact our team afterwards for an appliance inspection from a Gas Safe-registered engineer.

Arrange a boiler repair

Get in touch to book a diagnosis and a clear, written quote. Priority and emergency visits are available.

Request a repair